Posts Tagged ‘Wilmar’
Allstar Performance ALL36108 Breather Tank with 1 Bung
Allstar Performance ALL36108 Breather Tank with 1 Bung
Aluminum breather tanks are 11-1/2 inch x 3 inches, include mounting bracket, clamp on breather element, drain, and one or two 3/8 inch NPT bung(s). This can vent two systems. Ideal for dry sumps and rear ends.
Allstar Performance ALL14306 4″ Grease Gun Tip
Allstar Performance ALL14306 4″ Grease Gun Tip
Tips provide access to grease fittings in tight areas, such as u-joints, and may also be used to grease the ball spline unit on Bert transmissions. The 2 inch tip replaces the standard end on most guns with 1/8NPT. Quick release 4 inch tip includes a small and large sleeve to fit standard couplers. Tips are for hand operated grease guns only.
K&N 69-9503TFK Black Performance Intake Kit
K&N 69-9503TFK Black Performance Intake Kit
- Guaranteed Horsepower
- Million Mile Limited Warranty
- Easy to Install, Usually in 90 Minutes or Less
- Lasts up to 100,000 miles before service is required (depending on driving conditions)
SLP Performance Parts 100228 160 Degree Thermostat
SLP Performance Parts 100228 160 Degree Thermostat
SLP Performance Parts, Inc. ms-SLP100228 160 DEGREE THERMOSTAT GM. 2004-07 LS1/LS6/ LS2 CORVETTE, LS1/LS2 GTO
Gorilla Automotive 71683NBC “The System” Acorn Black Chrome Wheel Locks (1/2″ Thread Size) – For 5 Lug Wheels
Gorilla Automotive 71683NBC “The System” Acorn Black Chrome Wheel Locks (1/2″ Thread Size) – For 5 Lug Wheels
- 1/2 Thread size
- Performance engineered for maximum street security
- Patented key wrench for easy lock-up
- Case hardened and triple chrome plated for lasting durability
- Contains 20 wheel locks and key
Klein 5119 4-Pocket Leather Tool Pouch
Klein 5119 4-Pocket Leather Tool Pouch
- Leather construction
- Riveted and stitched for durability
- Slotted
- Knife snap add on
- 4 pockets total
Performance Tool W38870 8 Piece 3/8 Drive SAE Hex Bit Socket Set 1/8″, 9/64″, 5/32″, 3/16″, 7/32″, 1/4″, 5/16″, 3/8
Performance Tool W38870 8 Piece 3/8 Drive SAE Hex Bit Socket Set 1/8″, 9/64″, 5/32″, 3/16″, 7/32″, 1/4″, 5/16″, 3/8
- 8 SAE Hex Bit 3/8″ Drive Sockets: 1/8″, 9/64″, 5/32″, 3/16″, 7/32″, 1/4″, 5/16″, 3/8″
- Lifetime Warranty
Magnetic Screwdriver Set w/ 15 bits Great for Cellphones, Computers, Gaming Devices Includes: T6, TORX®, PHILIPS, SLOTTED, SPANNER, TRI-WING®, BENT PRY TOOL, ROUND AWL, RESET PIN for Game Boy Advance, Nintendo Wii, DS Lite, NDS
Magnetic Screwdriver Set w/ 15 bits Great for Cellphones, Computers, Gaming Devices Includes: T6, TORX®, PHILIPS, SLOTTED, SPANNER, TRI-WING®, BENT PRY TOOL, ROUND AWL, RESET PIN for Game Boy Advance, Nintendo Wii, DS Lite, NDS
- Ideal for accessing fasteners in tight areas.
- Screwdriver in set features 1/4″ hex bits.
- Exact Fit Precision Machined Tips.
- Good for cellular phones, laptops and gaming devices
- Kit includes: Screwdriver head,T5, T6, T8, T10, T15, PHILIPS: #0, #1, #2,SLOTTED: #2 [2mm], #3 [3mm], SPANNER #4, TRI-WING #0, BENT PRY TOOL, ROUND AWL, RESET PIN.
Ingersoll Rand SK4C3F 1/2-Inch Drive 3-Piece Lugnut Service Flip Impact Socket Set
Ingersoll Rand SK4C3F 1/2-Inch Drive 3-Piece Lugnut Service Flip Impact Socket Set
- Tough and versatile 1/2-inch 3-piece flip impact socket set
- Forged chrome-molybdenum steel for high-strength durability
- Laser-etched size labeling
- Electro-phosphate finish for a sleeker look and high visibility
- Limited lifetime warranty
Pro.Fit International DM-40-22 Dash Trim Removal Tool
Pro.Fit International DM-40-22 Dash Trim Removal Tool
- Allows for scratch free removal of Dashboard Panels
- Durable composite plastic lasts installation after installation
- Makes installing a Vehicle Specific Mount a breeze
- Great for tucking antenna leads under headliners, etc.
Wilmar W1062 11 Piece Metric Polished Combo Wrench Set with Rack
Wilmar W1062 11 Piece Metric Polished Combo Wrench Set with Rack
- Wilmar Corporation
- W1062
- Combination Wrenches
Toolbox Socket Organizer
Toolbox Socket Organizer
- Fits drawer of most roll-away toolboxes
- 22in.L x 16 1/2in.W
Astro Pneumatic 4505 5-Piece Fastener and Molding Remover Set
Astro Pneumatic 4505 5-Piece Fastener and Molding Remover Set
- Set includes 5 distinctive tools for easy removal of fastener, molding, wheel hubs, etc
- For use on internal and external vehicle molding and trim fasteners
- Plastic construction of tools prevents scratching and damage to vehicle paint, leather, chrome, etc.
- 5-piece fastener and molding remover set
Gates K050345RB Blue Racing Micro-V Belt
Gates K050345RB Blue Racing Micro-V Belt
- Belts are precision ground, not cut, so they fit the pulley with absolute perfection
- 5 Ribs, .667 inch (17mm) top width, 34.64 inch (880mm) effective length, 35.206 inch (894mm) outside circumference
- High-modulus, low-stretch polyester means Herculean strength for high load-carrying capability
- Aramid reinforcement in a patented EPDM compound for three times the heat resistance and durability of standard belts
- Patented EPDM compound gives Gates Racing belts extended service life
K&N 33-2326 High Performance Replacement Air Filter
K&N 33-2326 High Performance Replacement Air Filter
- A high-flow, washable filter that delivers the maximum amount of air possible into your engine while providing superior filtering
- Multiple layers of cotton fabric sandwiched between pleated aluminum screen capture airborne dirt particles
- Improves horsepower and torque
- Emission legal in all 50 states, will not void manufacturer’s warranty
- Filters can be cleaned over and over, and are backed by a million mile limited warranty
Arsenal 5548 Electrician’s Tool Pouch
Arsenal 5548 Electrician’s Tool Pouch
- 2 Large main pockets
- 5 Smaller Pockets
- 6 Large screwdriver slots
- Electrical tape chain and tool spring clip
- One Size
Launch CReader V scan tool/code reader (437001)
Launch CReader V scan tool/code reader (437001)
- Diagnostic Codes: read and erase DTCs (both generic and manufacturer specific)
- Display and Graph Real Time Parameters
- View Freeze Frame Data
- I/M Readiness
- Vehicle Information (VIN, Calibration ID, Calibration verification number)
OTC 4504 Stinger ISO Bubble Flaring Tool Kit
OTC 4504 Stinger ISO Bubble Flaring Tool Kit
- Designed for crack-free bubble flares on soft steel tubing used in automotive brake systems
- Flaring bar and all the adapters needed for ISO bubble flaring
- Forged yoke is made of heat-treated steel
- Includes four dies 4.75 6 8 and 10 mm
- Housed in a blow-molded storage case
Denali 39-Piece Precision Tool Set
Denali 39-Piece Precision Tool Set
- Designed to meet all of your small tool needs when tuning or repairing computers, cameras, clocks, and other fine instruments
- Each set is conveniently packed into its own case, so you only have to carry the set you need for the job
- Professional quality chrome nickel pliers with comfortable double dipped handles
- Includes 23-piece knife and blade set, 10-piece precision screwdriver set, 6-piece mini plier set
- Aluminum handled knife and blade set
Graintex ND1755 18 Pocket Tool Pouch Set
Graintex ND1755 18 Pocket Tool Pouch Set
- 2 Main, 3 Medium and 13 Small tool Pockets
- 1 Hammer Holder and 1 Metal Tape Holder Clip
- 2-Inch Nylon Belt Fits Waist 28-Inchx50-Inch
- Double Needle Roller Buckle
- Made from 600D Polyester
Virtual Store


















