Archive for the ‘Engine Tools’ Category
B800 for BMW SRS Scan/reset Airbag Scan/reset Car Diagnostic Tool /Equipment
B800 for BMW SRS Scan/reset Airbag Scan/reset Car Diagnostic Tool /Equipment
- Display Airbag Fault Codes
- Clear Airbag Fault Codes
- Resets the “SRS” Light.
- Very easy to use.
- Compatible for most BMWs built between 1994 and 2003.
Assenmacher Specialty Tools V 410 Oil Filter Housing Wrench for BMW and Volvo
Assenmacher Specialty Tools V 410 Oil Filter Housing Wrench for BMW and Volvo
- For removal of oil filter housing
- Made of cast aluminum
- Perfect fit
UView 550000 Airlift Cooling System Leak Checker and Airlock Purge Tool Kit
UView 550000 Airlift Cooling System Leak Checker and Airlock Purge Tool Kit
- Airlift eliminates problematic airlocks in today’s automobile cooling systems
- Utilizing shop air, the technician can perform a leak test, eliminate airlocks and refill the entire system including the heater core in less than two minutes
- OEM approved
OTC 4731A Damper Holding Tool for Acura and Honda
OTC 4731A Damper Holding Tool for Acura and Honda
- Holds damper for removal and installation of the crank bolt on most Honda/Acura engines
- Can remove and install the damper so engine will not rotate
- Will fit around accessories eliminating additional part removal
- 1/2 inch square drive can be used with ratchet or breaker bar
- Proper fit for applications and allows use of impact tool to remove bolt
ScanTool 426101 OBDLink MX Bluetooth/OBD-II Scan Tool Interface
ScanTool 426101 OBDLink MX Bluetooth/OBD-II Scan Tool Interface
- Supports SW-CAN (GM) and MS-CAN (Ford), plus All 5 OBDII Protocols; access manufacturer proprietary networks
- Exclusive Battery Saver technology – leave it plugged in without danger of draining your car’s battery
- Works on PCs, Smartphones and Tablets – Windows, Android, Symbian and more
- Compatible with more vehicles and software than any other OBD interface on the market
MS300 Code Reader Check Engine Light Reset Tool OBD2 OBDII EOBDII
MS300 Code Reader Check Engine Light Reset Tool OBD2 OBDII EOBDII
Specification:
The MaxiScan MS300 CAN OBD-II Code Reader provides auto enthusiasts with an easy, portable and economic way to check Diagnostic
Trouble Codes (DTCs) and their definitions for OBD-II compliant vehicles. OBD-II
is the second generation of onboard diagnostics and has been a mandatory
requirement for all vehicles sold in the US since 1996, both domestic and
imports. The MS300 supports all current OBD-II protocols–communications between
your car’s components and systems–includin
Allstar Performance ALL10140 Engine Lift Plate for Chevy LS Series
Allstar Performance ALL10140 Engine Lift Plate for Chevy LS Series
- ** NOTE : PRODUCT IMAGE MAY NOT BE VEHICLE SPECIFIC
Astro Pneumatic 5820 Engine Transverse Bar with Support Arm
Astro Pneumatic 5820 Engine Transverse Bar with Support Arm
- Support arm provides 3 point support off-center loads
- Includes: 1/8″ braided steel cables and 14″ adjustable hooks
- Capacity: 700 lbs
- Easy removal of transaxle
- Weight 22 lbs.
CTA Tools 2820 Diesel Glow Plug Remover
CTA Tools 2820 Diesel Glow Plug Remover
- Removes Damaged or Stuck Glow Plugs in Diesel Engines Without Removing Cylinder Head
- Includes 10 Millimeter and 12 Millimeter Split Nuts and 3 Spacers
- Services 6.9 and 7.3 Lliter Ford
- Services 6.2 and 6.4 Liter GM
- CTA Tools Offers One of the Widest Ranges of Professional Specialty Tools in the Market
KD Tools KDS-2031 Exhaust and Tailpipe Cutter
KD Tools KDS-2031 Exhaust and Tailpipe Cutter
- Use tool to cut pipes 3/4-Inch to 3-Inch in diameter
- Fifteen blades effectively cut pipe so only a quarter turn is needed for complete cut
- Tool works well in hard to reach areas
- Will not cut double wall pipes
- Not for use on stainless steel
VW/Audi Spark Plug Wire Boot Remover 2.0 engine Tool
VW/Audi Spark Plug Wire Boot Remover 2.0 engine Tool
Spark plug socket remover for new beetle and cars with 2.0 engine AZJ. LOCKING, VW GOLF IV & V with 1.6 engine, VW AUDI, BORA, MERCEDES, SMART…etc.
Length:264mm
Made of stainless steel.
Lisle 33500 Piston Ring Installer
Lisle 33500 Piston Ring Installer
- Tapered jaws to remove and install most passenger car and light truck rings from 3/64″ to 1/4″ (1.2 – 6.3mm)
- Skin-packed
Kat’s 24150 150 Watt 4″x 5″ Universal Hot Pad Heater
Kat’s 24150 150 Watt 4″x 5″ Universal Hot Pad Heater
- Silicone covered for oil and acid resistance
- Universal applications
- Thermostatically controlled
- Use as an oil or transmission pan heater
- Easy to install, as it requires little mechanical ability
Lisle 14100 Valve Core Tool
Lisle 14100 Valve Core Tool
- Removes and installs valve cores and valve core caps
- Fits both large and small valve cores
- Use the reverse end to remove and install valve core caps
- The long tool handle will access inside dual wheels
- The lightweight aluminum body is equipped with a pocket clip
Autel MaxiScan MS509 OBD-II/EOBD Scanner
Autel MaxiScan MS509 OBD-II/EOBD Scanner
- Retrieves generic and manufacturer specific Diagnostic Trouble Codes (DTC), features built-in OBD-II DTC lookup library and software is upgradeable via Internet
- Features large easy-to-read backlit LCD screen, a multilingual menu and DTC definitions and standard 16-pin OBD-II connectivity; no additional cables are needed
- Contains advanced functionality including: live PCM datastream, live O2 sensor test data, graphs data (1996 and newer), memory backup for off-vehicle data review and analysis, and USB printing
- Supports the CAN (Controller Area Network) protols and all other current OBD-II protocols
- Works with all OBD-II/EOBD compliant U.S., European and Asian vehicles (OBD-II is standard on all cars sold in U.S. post-1996)
OHV OHC CVH Valve Spring Compressor Keeper Seal on Engine Remove Install Tool
OHV OHC CVH Valve Spring Compressor Keeper Seal on Engine Remove Install Tool
- Tool spring depth reach grips to retainer are adjustable to fit many large and small spring applications.
- Use on Overhead Cam engines (OHC), Over head valve Engines (OHV) and the Compound Valve Angle Hemispherical Combustion Chamber heads like Ford (CHV)
- Cam action level design for secure valve spring locking into the tool
- Not suitable for deep pocket (seated) valve spring engines.
Lisle 41000 Left Hand Rear Disc Brake Caliper Tool
Lisle 41000 Left Hand Rear Disc Brake Caliper Tool
- With left hand threads for Ford applications
- This tool easily removes and installs the difficult brake spring clip found on smaller Fords
- For Ford Contour, Focus and Mercury Mystique
- Package dimension is 5.75 inches width by 10.5 inches height by 1 inches depth
Virtual Store


















